# Pairing

The app is a Bluetooth keyboard of its own, `Claude Remote`, with an address and keys apart from the device's stock Remote, so pairing one leaves the other's untouched. It advertises whatever the device's Bluetooth setting.

## Once per Mac

With the device on its desktop:

1. Run `mise run launch`. Not over the device's open Apps browser: the pairing dialog waits behind it, and closing the app hangs until the browser ends.
2. If the device shows `Reconnect stopped`, press any button but Back: the Mac can reach the device only for a minute after that press or the launch.
3. In the Mac's Bluetooth settings, press Connect on `Claude Remote` under Nearby Devices, and accept the request.
4. Press OK in `Verify code` on the device. Cancel leaves the app open on `No link`.
5. Close Keyboard Setup Assistant if it opens: the device has no keys for it.

## After pairing

From then on the Mac connects by itself, within a second of a drop, and the app reconnects with no press when it opens again. Past a minute with no link, the device needs a press first, on `Reconnect stopped`.

To pair again, forget the device on the Mac first. Connecting then shows `Verify code` again.

While the app is on Bluetooth it holds the radio, so the phone app's connection waits. On taking [USB](<https://petr-korobeinikov.github.io/f0-claude-remote/guide/usb/index.md>) or leaving, it hands the radio back, and the device's Bluetooth stands as its setting says.
