Skip to content

Pairing

The app is a Bluetooth keyboard of its own, Claude Remote, with an address and keys apart from the device's stock Remote, so pairing one leaves the other's untouched. It advertises whatever the device's Bluetooth setting.

Once per Mac

With the device on its desktop:

  1. Run mise run launch. Not over the device's open Apps browser: the pairing dialog waits behind it, and closing the app hangs until the browser ends.
  2. If the device shows Reconnect stopped, press any button but Back: the Mac can reach the device only for a minute after that press or the launch.
  3. In the Mac's Bluetooth settings, press Connect on Claude Remote under Nearby Devices, and accept the request.
  4. Press OK in Verify code on the device. Cancel leaves the app open on No link.
  5. Close Keyboard Setup Assistant if it opens: the device has no keys for it.

After pairing

From then on the Mac connects by itself, within a second of a drop, and the app reconnects with no press when it opens again. Past a minute with no link, the device needs a press first, on Reconnect stopped.

To pair again, forget the device on the Mac first. Connecting then shows Verify code again.

While the app is on Bluetooth it holds the radio, so the phone app's connection waits. On taking USB or leaving, it hands the radio back, and the device's Bluetooth stands as its setting says.